Bs250 - Revision history

Kinarfi at 13:48, 5 August 2016

2016-08-05T13:48:30Z

Kinarfi at 13:47, 5 August 2016

2016-08-05T13:47:07Z

Kinarfi: .model and .sub for BS250

2016-08-05T13:02:53Z

.model and .sub for BS250

New page

.MODEL BS250 VDMOS pchan Rg=160 VTO=-3.193 RS=2.041 RD=0.697 IS=2E-13 KP=0.277 Cjo=105p PB=1 LAMBDA=1.2E-2 RB=0.309 Rds=1.2E8 Cgdmax=57p Cgdmin=5p CGS=47p TT=86.56n BV=45 IBV=10u
or
*2 models for BX250 p fet, I've tried both.

.SUBCKT BS250 1 2 3
* 1=drain 2=gate 3=source
Cgs 2 3 20.1E-12
Cgd1 2 4 57.1E-12
Cgd2 1 4 5E-12
M1 1 2 3 3 MOST1
M2 4 2 1 3 MOST2
D1 1 3 Dbody
.MODEL MOST1 PMOS(LEVEL=3 VTO=-2.3 W=7.6m L=2u KP=10.33u RD=4.014 RS=20m)
.MODEL MOST2 PMOS(VTO=2.43 W=7.6m L=2u KP=10.33u RS=20m)
.MODEL Dbody D(CJO=53.22E-12 VJ=0.5392 M=0.3583 IS=75.32E-15 N=1.016 RS=1.245
+ TT=86.56n BV=45 IBV=10u)
.ENDS

*ZETEX BS250P Spice Model v1.0 Last Revised 19/3/03
*
.SUBCKT BS250P 3 4 5
* D G S
M1 3 2 5 5 MBS250
RG 4 2 160
RL 3 5 1.2E8
C1 2 5 47E-12
C2 3 2 10E-12
D1 3 5 DBS250
*
.MODEL MBS250 PMOS VTO=-3.193 RS=2.041 RD=0.697 IS=1E-15 KP=0.277
+CBD=105E-12 PB=1 LAMBDA=1.2E-2
.MODEL DBS250 D IS=2E-13 RS=0.309
.ENDS BS250P
*
*$
*

@@ Line 1: / Line 1: @@
 .MODEL BS250P VDMOS pchan Rg=160 VTO=-3.193 RS=2.041 RD=0.697 IS=2E-13 KP=0.277 Cjo=105p PB=1 LAMBDA=1.2E-2 RB=0.309 Rds=1.2E8 Cgdmax=57p Cgdmin=5p CGS=47p TT=86.56n BV=45 IBV=10u
   or
-*2 models for BX250 P fet, I've tried both.
+*2 models for BX250P Pfet, I've tried both.

@@ Line 1: / Line 1: @@
-.MODEL BS250 VDMOS pchan Rg=160 VTO=-3.193 RS=2.041 RD=0.697 IS=2E-13 KP=0.277 Cjo=105p PB=1 LAMBDA=1.2E-2 RB=0.309 Rds=1.2E8 Cgdmax=57p Cgdmin=5p CGS=47p TT=86.56n BV=45 IBV=10u
+.MODEL BS250P VDMOS pchan Rg=160 VTO=-3.193 RS=2.041 RD=0.697 IS=2E-13 KP=0.277 Cjo=105p PB=1 LAMBDA=1.2E-2 RB=0.309 Rds=1.2E8 Cgdmax=57p Cgdmin=5p CGS=47p TT=86.56n BV=45 IBV=10u
   or
-*2 models for BX250 p fet, I've tried both.
+*2 models for BX250 P fet, I've tried both.
-.SUBCKT BS250 1 2 3
+.SUBCKT BS250P 1 2 3
 * 1=drain  2=gate  3=source
 Cgs  2 3 20.1E-12